The Stage I SCS brings you the same features and strength as Tilt’s higher end clamps in a simplified design. Just like Tilt’s other SCS, custom bolts with a 6mm hex key drive and 50% larger threads provide more clamping power and help keep your bars in place and compression tight. Every clamp bolt from Tilt comes with pre-applied anti-seize to prevent the bolts from seizing to the clamp.

This clamp will have you joining the ranks of thousands of riders who trust Tilt SCS. The Tilt SCS is an SCS compression system. The stage 1 SCS clamp is a full-size SCS because it is slightly larger than a baby SCS but provides maximum clamping power. The Tilt SCS only works with SCS bars without a slit. While SCS compression is more expensive than other compression systems, it is the most effective compression system you can put on a pro scooter.

The Tilt stage 1 clamp includes a shim and works with both oversized and standard outer diameter Pro Scooter Bars without a slit. The Tilt Stage 1 SCS includes M8 bolts for maximum clamping power. The Tilt SCS works with the SCS compression ONLY.

Tilt Stage 1 SCS Clamp Specifications:

• Weight: 8.8oz
• Material: Forged and anodized 6061-T6 aluminum
• Height: 3″
• Hardware: Pregreased custom bolts
• Handlebars: Standard and oversized
• Shim: 38.1mm Height
• Clamp & Compression Bolts: M8
• Compression Washer: M8
• Available colors: BLACK

The Stage I SCS brings you the same features and strength as Tilt’s higher end clamps in a simplified design. Just like Tilt’s other SCS, custom bolts with a 6mm hex key drive and 50% larger threads provide more clamping power and help keep your bars in place and compression tight.

Every clamp bolt from Tilt comes with pre-applied anti-seize to prevent the bolts from seizing to the clamp. This clamp will have you joining the ranks of thousands of riders who trust Tilt SCS.

Includes: Clamp and compression bolts, compression washer, and shim

SPECIFICATIONS

• Weight:250g (including hardware)
• Material: Forged and anodized 6061-T6 aluminum
• Height: 3.0
• Hardware: Pregreased custom bolts
• Handlebars: Standard 1-” and oversized 1-“
• Shim: 38.1mm Height
• Clamp & Compression Bolts: M8
• Compression Washer: M8
• Fork: 1-” Threadless steertube